Investigation of the Feasibility of Optical Diagnostic Measurements at the Exit of the Ssme
Author | : National Aeronautics and Space Adm Nasa |
Publisher | : Independently Published |
Total Pages | : 50 |
Release | : 2018-10-26 |
ISBN-10 | : 1729298915 |
ISBN-13 | : 9781729298916 |
Rating | : 4/5 (916 Downloads) |
Download or read book Investigation of the Feasibility of Optical Diagnostic Measurements at the Exit of the Ssme written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-10-26 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under Contract NAS8-36861 sponsored by NASA Marshall Space Flight Center, the United Technologies Research Center is conducting an investigation of the feasibility of remote optical diagnostics to measure temperature, species concentration and velocity at the exit of the Space Shuttle Main Engine (SSME). This is a two phase study consisting of a conceptual design phase followed by a laboratory experimental investigation. The first task of the conceptual design studies is to screen and evaluate the techniques which can be used for the measurements. The second task is to select the most promising technique or techniques, if as expected, more than one type of measurement must be used to measure all the flow variables of interest. The third task is to examine in detail analytically the capabilities and limitations of the selected technique(s). The results of this study are described in the section of this report entitled Conceptual Design Investigations. The conceptual design studies identified spontaneous Raman scattering and photodissociative flow-tagging for measurements respectively of gas temperature and major species concentration and for velocity. These techniques and others that were considered are described in the section describing the conceptual design. The objective of the second phase of investigations was to investigate experimentally the techniques identified in the first phase. The first task of the experimental feasibility study is to design and assemble laboratory scale experimental apparatus to evaluate the best approaches for SSME exit optical diagnostics for temperature, species concentrations and velocity, as selected in the Phase I conceptual design study. The second task is to evaluate performance, investigate limitations, and establish actual diagnostic capabilities, accuracies and precision for the selected optical systems. The third task is to evaluate design requirements and system trade-offs of conceptual instruments. Spontaneous Raman scatt